Isolation System Performance
Isolation Unit DM-900A/900AL/910A/910AL Specifications
| Item | DM-900A | DM-900AL | DM-910A | DM-910AL | |
|---|---|---|---|---|---|
| Signal input part | Frequency characteristics (-3dB) |
500MHz | |||
| Band limiter | 20MHz/100MHz | ||||
| Input impedance |
1MΩ//16pF | ||||
| Maximum input voltage | 400Vmax(DC+peak AC≦5kHz)CAT I | ||||
| Number of channels | 2 (However, no isolation between channels) | 1 | |||
| Input coupling | GND, DC1M, AC1MΩ | GND, DC1MΩ | |||
| Input sensitivity | 2mV/div~10V/div,1-2-5 step | MAIN:50mV/div~5V/div,1-2-5 step Zoom:2mV/div~1V/div,1-2-5 step |
|||
| Offset range | 2mV/div ~ 50mV/div: ±1V 100mV/div ~ 500mV/div: ±10V 1V/div ~ 10V/div: ±100V |
MAIN: 50mV/div ~ 500mV/div: ±10V 1V/div ~ 5V/div: ±100V ZOOM: 2mV/div ~ 20mV/div: ±2V 50mV/div ~ 1V/div: ±20V |
|||
| DC gain accuracy | ±(1.5％ +0.5％ of fullscalle) | ||||
| Offset accuracy | 2 mV/div ~ 50 mV/div :① 100 mV/div ~ 500 mV/div :② 1 V/div ~ 10 V/div :③ |
CH1-MAIN : 50mV/div ~ 500mV/div :② 1V/div ~ 5V/div :③ CH2-ZOOM : 2mV/div ~ 20mV/div : ① 50mV/div ~ 1V/div :② |
|||
| ①:±(1.0% +0.5% of fullscalle+1mV) ②:±(1.0% +0.5% of fullscalle+10mV) ③:±(1.0% +0.5% of fullscalle+100mV) |
|||||
| Probe sense | 10:1, 100:1, 1000:1(Detection/optional setting) | ||||
| Maximum Sample rate |
2GS/s (1ch), 1GS/s (2ch) | 1GS/s | |||
| Vertical axis resolution | 8-bit | 8 bits + 8 bits | |||
| Maximum memory length | 500kpoints/ch | 16Mpoints/ch | 500kpoints/ch | 16Mpoints/ch | |
| Trigger System part |
Trigger source | CH1, CH2 | CH1-MAIN | ||
| Trigger slope | Positive/Negative | ||||
| Coupling | AC, DC, HFREJ, LFREJ | ||||
| Level range | 125% of full scale | ||||
| Interface | 1 pair of 3 optical interfaces (2m to 200m optical fiber) | ||||
| Power supply battery part |
Battery | Three battery packs can be integrated (can operate with one) | |||
| Battery | Can be charged with the main unit | ||||
| Battery Charger |
Sold separately | ||||
| Power consumption | 120VAmax(AC power supply) | ||||
| Battery Operating time |
Approximately 12 consecutive hours (when 3 batteries are used) | ||||
| Battery Charging time |
Charging with the main unit for approx. 6 hours | ||||
| AC power supply | AC100V~240V(50/60Hz) | ||||
| Calibration signal | 0.6V/6V (Switching) | ||||
| Mechanism | External dimensionsmm | Approx.122W×258H×544D | |||
| Weight | Approx. 7kg (excluding battery pack and accessories) Battery pack (sold separately) Mass approx. 660g/piece |
||||
| Operating environmental temperature | 0 ~ 40ºC | ||||
| Performance warranty temperature | 10 ~ 35ºC | ||||
| Accessories | Battery pack | Sold separately | |||
| Power cord | 1 pc | ||||
Main unit DM-8000H Specification
| Item | DM-8000H | |
|---|---|---|
| Transceiver card | Number of connected slots | 6 slots (up to 12 isolation units or acquisition units can be connected) |
| Time axis | Sweep range | 1ns/div ~ 20s/div |
| Clock accuracy | ≦10ppm | |
| Acquisition mode | Normal/Peak | |
| Trigger system | Trigger operation mode | Auto, Normal, Single, Stop |
| Trigger source | Up to 24CH, EXT trigger | |
| Trigger type | Edge, pulse width | |
| Trigger delay | Yes | |
| Power supply part | AC power supply | 100 ~ 240V( 50/60Hz) |
| Power consumption mass | 130VAmax | |
| Accessories | LAN cable | 1 pc |
| Power cord | 1 pc | |
| Instruction manual | CD-R | |
| Control software | IS Viewer DM-800 CD-R (1 pc) | |
Transceiver Card DM-600A Specifications
| Item | DM-600A |
|---|---|
| Isolation unit/ Number of acquisition unit connections |
DM-600A: 2( DM-900A/AL, DM-910A/AL) |
| Operation indicator | Equipped with LED status display |
| Mechanism | Card type to be inserted into the main unit DM-8000H |
| Operating environmental temperature | 0 ~ 40ºC |
| Performance warranty temperature | 0 ~ 35ºC |
Control software IS viewer DM-800 specifications (included with DM-8000H main unit)
| Item | DM-8000 | |
|---|---|---|
| Main features | Operations | ＋，－，×，÷，¦×¦，¦÷¦，∫，dy/dx |
| Parameter measurement | Max, Min, p-p, Top, Base, Top-Base, RMS, CycleRMS, Mean, Cyclemean, +/－Overshoot, TransitionTime, dv/dt, Freq, Period, +/－PulseCount, +/－PulseWidh, Duty, Integral, Integral(abs), Integr(al pos), Integr(al neg), Ske(w ％), Ske(w Level) | |
| Other functions | XY display, FFT, cursor, smoothing, channel deskew, rescale, offline view function |
|
| Waveform save | CSV | |
| Image save | BMP, PNG,Clipboard | |
| Setup save | with Waveform/without Waveform | |
| Accessories | Installer | CD-R (1 pc) |
| PC specifications | CPU: 1GHz or faster 64-bit CPU Memory: At least 2 GB OS: Windows 7 SP1 (64-bit), Windows 8.1 (64-bit), Windows 10 (64-bit) Display: WXGA display (1280 x 768 pixels) or higher recommended (SXGA display (1280x1024) required for full display) |
|
